A 2019-P graded MS68 with Full Bands sold for $1,375 — yet most 2019 dimes are worth exactly face value: 10¢. The difference comes down to strike quality, grade, and whether the torch bands on the reverse are fully separated. This free guide covers everything: exact values by mint and condition, Full Bands identification, known errors, and where to sell.
★★★★★ Trusted by 1,247 collectors · Based on PCGS & auction data
Check My 2019 Dime Value →Select your mint mark, condition, and any errors to estimate your coin's value.
If you're not sure about your coin's mint mark or condition, there's a free 2019 Dime Coin Value Checker tool that can help you identify key details before using the calculator above.
Type a description of your coin and our analyzer will flag potential value indicators.
Skipped the calculator? Get an instant value estimate for your 2019 dime — no signup, no guessing.
Use the Calculator →The Full Bands designation is the single biggest value driver for 2019 Roosevelt dimes. Use this checklist to find out if yours might qualify.
The horizontal bands on the torch handle appear merged or mushy at one or both band pairs. This is by far the most common result on 2019 P and D dimes, and the coin is worth face value if circulated or $2–$25 if uncirculated (depending on grade). Die wear and high-speed striking pressure cause most business strikes to fall short.
Both the upper and lower horizontal band pairs on the torch handle show complete, unbroken separation under magnification — no bridging metal between the lines. PCGS calls this Full Bands (FB); NGC uses the stricter Full Torch (FT) standard. These coins were struck with fresh, unworn dies at optimal pressure. An MS68 FB 2019-P sold for $1,375. Even at MS65 FB, a 2019 dime is worth $10–$20 over a standard MS65.
The chart below covers all major 2019 Roosevelt dime varieties across every grade tier. For a complete step-by-step illustrated 2019 dime identification walkthrough and reference guide, the CoinValueApp guide is a thorough external resource. Rows highlighted in gold are the signature Full Bands variety; the rarest row is highlighted in orange.
| Variety | Worn / Circulated | AU / MS63 | MS65 (Gem) | MS67+ or PR70 |
|---|---|---|---|---|
| 2019-P (No FB) | $0.10 – $0.35 | $0.50 – $2.00 | $1.50 – $5.00 | $10 – $25 |
| 2019-D (No FB) | $0.10 – $0.35 | $0.60 – $2.50 | $1.50 – $5.00 | $10 – $70 |
| 2019-P Full Bands ⭐ | — | $2 – $10 | $10 – $20 | $50 – $1,375+ |
| 2019-D Full Bands 🔴 | — | $2 – $10 | $12 – $20 | $60 – $1,750+ |
| 2019-S Clad Proof | — | — | $5 – $9 (PR65) | $15 – $20 (PR70) |
| 2019-S Silver Proof (.999) | — | — | $6 – $10 (PR65) | $15 – $37 (PR70) |
⭐ = Signature variety (Full Bands). 🔴 = Highest recorded auction price. Values based on PCGS auction data and Greysheet CPG® · 2026 edition. Individual coins may vary.
📱 CoinHix lets you scan your 2019 dime on the go and instantly estimate its grade tier and Full Bands potential before visiting a dealer — a coin identifier and value app.
The 2019 Roosevelt dime, despite its billion-coin mintage, produced a range of genuine mint errors that collectors prize. Each variety card below covers what the error is, how to identify it, and what drives its market value. Note: claimed doubled die (DDO/DDR) varieties are not cataloged in authoritative references for 2019 — all listed errors here are well-documented, physically verifiable mint production anomalies.
The Full Bands (FB) designation from PCGS and Full Torch (FT) from NGC are strike quality attributions awarded to Roosevelt dimes whose reverse torch shows complete, sharp separation of both the upper and lower horizontal band pairs. On a standard business strike, high-speed production and die wear cause these bands to merge into an indistinct mush — the vast majority of 2019 P and D dimes fall into this category.
Visually, a qualifying coin shows four distinct horizontal lines across the torch handle in two pairs: the bands must be razor-sharp, fully unbroken, and free of any bridging metal between them. NGC's Full Torch standard is stricter, additionally requiring that the vertical lines running the length of the torch body be clearly defined and uninterrupted.
Because only fresh, unworn dies striking at optimal pressure produce Full Bands coins, they are genuinely rare among the 1.1–1.0 billion business strikes each mint produced in 2019. A 2019-P PCGS MS68 FB sold for $1,375 in October 2020 on eBay (confirmed by PCGS auction records), while a 2019-D MS69 FB PL achieved $1,750. The premium over a non-FB coin at the same grade can exceed 5,000%.
An off-center strike occurs when the planchet is not properly positioned between the obverse and reverse dies at the moment of striking. Instead of the design being centered on the coin, it is impressed off to one side, leaving a blank crescent of unstruck planchet metal visible. The misalignment happens when a coin fails to seat correctly in the collar before the dies come together.
The diagnostic feature is obvious: part of Roosevelt's portrait or the reverse design is cut off or missing, while the opposite side of the coin shows bare, unstruck planchet metal. Collectors measure off-center strikes by the approximate percentage of the design that is missing — a 10% off-center is modest, while a 50% example is dramatic and far more desirable. The date must remain legible for maximum value.
Values scale directly with the percentage of misalignment. Minor examples of 5–10% off-center bring roughly $10–$20, while dramatic 30–50% off-center strikes on 2019 dimes can fetch $40–$60 or more. Coins where the date remains clearly visible at high percentages carry the strongest premiums, as date-visible major off-centers are particularly sought after by error collectors.
A missing clad layer error occurs during planchet production, before striking, when the bonding process fails to properly fuse the outer copper-nickel alloy layer to one side of the coin's pure copper core. The result is a coin that looks completely normal on one face but displays a vivid copper-red surface on the other — the raw copper core exposed where the silvery clad layer should be.
Identification is unmistakable: one side of the coin retains its normal silver-toned clad appearance with Roosevelt's portrait or the torch design struck normally, while the opposite face appears bright copper-red or reddish-orange with the same design struck into the soft copper core. The coin will weigh slightly less than a standard dime due to the missing alloy layer, which can be confirmed with a precise scale.
Missing clad layer errors are among the most visually dramatic and most valuable of the common 2019 dime errors. Obverse missing clad examples — showing Roosevelt's portrait against a copper background — typically command the highest premiums because the portrait contrast is more striking to collectors. Values range from $25 for a reverse missing clad to $50 or more for a vivid obverse example in problem-free condition.
A die clash occurs when the obverse and reverse dies come together without a planchet between them — the dies strike each other directly. Because each die is hardened steel with a mirror-image impression of its side's design, the clash transfers a faint negative impression of the obverse die onto the reverse die (and vice versa), and subsequent coins struck from those damaged dies bear faint ghost images of the opposing side's design in their fields.
On a 2019 dime with a die clash, the obverse may show faint outlines of the reverse's torch or lettering ghosted into the field behind Roosevelt's portrait, while the reverse may show the faint silhouette of Roosevelt's profile in the field near the date or torch. The severity of the clash impression varies — mild clashes are subtle and require magnification; severe clashes produce bold, easily visible ghost outlines.
Die clashes on modern Roosevelt dimes are underappreciated by casual collectors but sought by error specialists. Severity is the primary value driver: a minor clash on a 2019 dime might bring a modest $15–$25 premium over face value, while a dramatic, bold clash on an otherwise high-grade uncirculated coin can command $50–$75 or more from dedicated error collectors who prize the visual impact of matching the design pairs.
Two distinct but related rim-abnormality errors are found on 2019 Roosevelt dimes. A broadstrike happens when the planchet is struck outside the collar die that normally contains the metal flow and forms the coin's edge. Without the collar's restraint, the metal spreads outward during striking, producing a coin that is slightly wider and thinner than normal, with a flat, underdeveloped rim and complete or partial absence of the normal reeded edge.
A rim cud is a different phenomenon caused by a die break. When a piece of the working die chips off — typically at the rim — all subsequent coins struck with that damaged die show a raised, featureless blob of metal in the corresponding location on the coin's rim. The design in the area of the break is obliterated on the coin, replaced by this raised, irregular lump of metal. Cuds are named for their resemblance to a cow chewing cud — a rounded, protruding mass at the periphery.
Both error types are visually compelling and attract error collectors. Broadstrikes on 2019 dimes typically bring $10–$25 depending on how dramatically the metal has spread and whether the reeding is fully absent. Rim cuds command $20–$40 or more based on the size and position of the cud — large cuds at prominent positions like near the date or portrait are most desirable, and multiple cuds on a single coin increase value further.
Think you've spotted one of these errors on your 2019 dime? Run it through the calculator to get an estimated value range.
Get My Estimate →
| Issue | Mint | Mintage | Type |
|---|---|---|---|
| 2019-P | Philadelphia | 1,147,500,000 | Business strike (clad) |
| 2019-D | Denver | 1,001,500,000 | Business strike (clad) |
| 2019-S | San Francisco | ~649,956 | Clad proof (collector) |
| 2019-S Silver | San Francisco | 460,925 | Silver proof .999 fine (collector) |
| Total (all issues) | ~2,149,649,956 | — | |
Survival note: With over 2.1 billion business strikes produced, circulated 2019 dimes survive in enormous quantities and trade at face value. The true rarity lies not in the date itself but in strike quality — Full Bands or Full Torch specimens represent a tiny fraction of survivors from the total mintage and are the coins that matter most to advanced collectors.
Obvious flatness on Roosevelt's hair above the ear and on his cheekbone. The "IN GOD WE TRUST" lettering may be weak. The reverse torch flame details are blurred. These trade at face value — 10 cents.
Slight friction on the highest points of Roosevelt's portrait and the reverse torch flame, but significant original luster remains in the protected areas. Better than circulated but not quite mint state. Worth $0.20–$0.60.
No wear anywhere on the coin. Original luster intact across all surfaces, though contact marks from bag handling may be visible. At MS65 (Gem), luster is strong and marks are minimal. Worth $1.50–$5 without Full Bands designation.
Outstanding luster, minimal marks, exceptional eye appeal. At MS67, the coin commands $10–$25. Above MS67, extreme rarity for 2019 business strikes. Add Full Bands at MS68 and value jumps to four figures. Check torch bands carefully at this level.
🔍 CoinHix helps you compare your coin against graded reference images to match its condition tier before submitting to a professional service — a coin identifier and value app.
The right venue depends on whether your coin is graded, what designation it carries, and how quickly you need to sell.
The top choice for certified 2019 dimes in MS67 FB or higher. Major auction houses reach deep-pocketed collectors worldwide and have set the record prices for Full Bands Roosevelt dimes. Their numismatic specialists understand the FB/FT premium and will market accordingly. Best for coins graded MS68 FB or above where the auction estimate starts at several hundred dollars.
The largest marketplace for 2019 Roosevelt dimes at all grade levels. Check recently sold 2019 dime prices and completed auction listings on eBay before setting your asking price. eBay works well for MS65–67 FB coins worth $10–$100, and for raw error coins where collector demand is solid. Use "Buy It Now" for common grades; auction format for rarer pieces where competition drives the final price up.
Ideal for quick sales of circulated 2019 dimes or error coins in lower grades. Expect wholesale pricing (50–70% of retail), but you'll receive immediate payment with no listing fees. For potentially high-value Full Bands coins, get a second opinion before accepting any offer — most local shops don't pay full market premiums for modern high-grade material.
The r/Coins4Sale subreddit connects you with fellow collectors who understand Full Bands premiums and modern error value. Reddit buyers tend to pay closer to retail than shops. The Coin Roll Hunting community (r/CRH) is excellent for finding buyers for raw error dimes pulled from circulation. Transactions require PayPal Goods & Services for buyer protection.
A circulated 2019 P or D dime is worth face value — 10 cents. Uncirculated examples grade-dependent trade between $2 and $25. The real money is in the Full Bands designation: a 2019-P graded MS68 FB sold for $1,375 in October 2020, and a 2019-D MS69 FB PL has reached $1,750. Proof examples from San Francisco range from $5 to $37 depending on whether they are clad or the 2019 .999 fine silver proof.
Full Bands (FB) is a strike designation awarded by PCGS to Roosevelt dimes that show complete, unbroken separation between both the upper and lower horizontal band pairs on the torch handle on the reverse. NGC uses the stricter Full Torch (FT) standard, which also requires clearly defined vertical torch lines. Most high-speed production strikes show mushy, merged bands, making FB and FT specimens rare even among modern dates. FB coins can be worth hundreds or thousands more than non-FB examples at the same grade.
The Philadelphia Mint struck 1,147,500,000 (about 1.15 billion) 2019-P dimes, while Denver produced 1,001,500,000 (about 1.0 billion) 2019-D dimes. San Francisco struck approximately 649,956 clad proof 2019-S dimes and 460,925 silver proof 2019-S dimes exclusively for collector sets. The enormous business-strike mintages explain why circulated examples are worth only face value, while the truly rare Full Bands specimens are survivors of quality from within those billions.
A circulated 2019-P dime is worth 10 cents. In uncirculated condition at MS65, it trades for around $1–$5. At MS67, values reach roughly $10–$25. The real premium arises from the Full Bands designation: an MS68 FB example sold for $1,375 at auction in October 2020 on eBay, confirmed by PCGS auction records. Without Full Bands, even gem MS68 examples are only worth around $25.
Three factors drive value: (1) Grade — the higher the numerical grade, the more it is worth. (2) Full Bands or Full Torch designation — this strike quality marker transforms an ordinary dime into a four-figure coin at the MS68 level. (3) Error type — genuine mint errors like off-center strikes, missing clad layer, broadstrikes, and die clashes all add a premium. A 2019 dime combining a high grade with Full Bands is extraordinarily rare given the billion-coin mintages.
Documented mint errors on 2019 Roosevelt dimes include: off-center strikes ($10–$60 depending on percentage), plating blister errors (minor premiums), die chip errors, strike-through errors (foreign material impressed into surface), die clash errors (mirror imprint of opposing die), missing clad layer errors ($25–$50), broadstrikes ($10–$25), lamination errors (surface flaking), rim cud errors (raised die-break blob at rim), and feeder finger marks. Note: no major doubled die varieties are cataloged in authoritative references for 2019.
Yes — the 2019-S silver proof dime is the first year the U.S. Mint changed the silver proof Roosevelt dime composition to .999 fine silver, up from the previous .900 fine silver alloy used for decades. With a mintage of approximately 460,925, these coins are far scarcer than the business strikes. In PR65 DCAM condition they trade for around $6–$10, with PR70 DCAM examples reaching $25–$37. Collectors consider this compositional change historically significant.
Flip the coin to the reverse and locate the torch. Just above the flame, the torch handle has two sets of horizontal bands — upper bands and lower bands. With a 10× loupe under good light, check whether both band pairs show clean, complete separation with no bridging metal between the lines. If both sets are fully separated with sharp definition, the coin may qualify for the Full Bands (PCGS) or Full Torch (NGC) designation. Any merging or mushiness in the bands means it will not qualify.
Never clean a coin intended for sale or grading. Cleaning — even with gentle soap or a cloth — destroys the coin's original surface luster, leaving microscopic hairlines visible under magnification. A cleaned coin is almost always given a details or net grade by PCGS or NGC and sells for a fraction of a problem-free example. The original toning and luster of an uncirculated coin are part of its value. If your coin might have Full Bands potential, handle it only by the edges and submit it raw to a grading service.
The mint mark on a 2019 Roosevelt dime is located on the obverse (front), below the neck truncation of President Roosevelt's portrait and just to the right, above the last digit of the date. Philadelphia coins carry a small "P," Denver coins carry a "D," and San Francisco proof coins carry an "S." All three mint marks are easy to see with the naked eye or a modest magnifier. There is no mintmark-less business strike for 2019 — Philadelphia resumed using the P mark on dimes in 1980.
Use the free calculator — select your mint mark, condition, and any errors to get an instant value estimate.
Calculate My Dime's Value →